An alternative transmission line design method is proposed that reduces the required conductor-to-ground clearance. In this method, third harmonic voltage is injected to the line, such that the peak amplitude of phase voltages is reduced while the fundamental component remains intact. The injected voltage does not influence the load or generation sides. The objective is to utilize the insulating strength of the conductor-to-ground clearance almost continuously rather than only during the crest voltage, as opposed to conventional ac lines. With this approach, for the same fundamental voltage level, the proposed line requires lower conductor to ground clearance. This could reduce the line construction capital investment by using shorter transmission towers. Furthermore, the existing ac lines could be upgraded with this method to increase their ground clearance, if desired. Injection of third harmonic voltage can also increase the loadability of existing ac lines, if the new phase-to-phase clearance is met. In this webinar, the operation of a power transmission line with injected third harmonic voltage is presented.
The Operation of a Power Transmission Line With Injected Third Harmonic Voltage
Posted: 24 Mar 2017
PES Members: Free
IEEE Members: $11.00
Please sign in at the top of the page. If you are not an IEEE member, please create a free account to make a purchase or become a society member to have access to all materials for free.
Evaluation of Smart Grid Technologies Employed for System Reliability Improvement: Pacific Northwest Smart Grid Demonstration Experience
Voltage Stability Constrained Optimal Simultaneous Placement of PMUs and Channels Enhancing Measurement Reliability and Redundancy
On Calculating Contact Current for Objects Insulated From the Earth and Immersed in Quasi static Electric Fields
Methodology of Automated Protection Analysis for Large Distribution Feeders With High Penetration of Photovoltaic Systems
Contribution to Bulk System Control and Stability by Distributed Energy Resources connected at Distribution Network